KILL SWITCH V2

This version of the kill switch comes in a 3 port water resistant black box that allows for mounting virtually anywhere. You can drill a bottom hole to mount to the T-track or side hole to mount to a seat base. One port is available to a 2/3 way toggle switch for trim/tilt functions or accessories. The dead man cap and lanyard remains on the same side as the tiller steering and throttle control.

These will be available once the component testing is complete.

FPV Mount
Kill switch mounted to the seat base.
FPV Mount
Side profile on the tiller control side.
FPV Mount
Low mounting position with extra port for a trim/tilt switch.
FPV Mount
Wires are fully sheathed in cable stress coverings
FPV Mount
Connects to the engine with the same waterproof plug.
FPV Mount
Remains off of the deck so water can flow underneath.
Ordering Page
Kayak Buddys Logo
About

We pride ourselves on customer service. Please call or email us with any concerns or questions you may have on our engine legs and complete systems. We are here to help.

Follow Us
Contact Info.
  • Mr. Matthew Pate, Owner
  • 3352 Beauclerc Rd.
  • Jacksonville, Florida 32257
  • mattpate@comcast.net
  • (305) 926-2937
Popular Pages


© Copyright 2022 KAYAKBUDDYS- All Rights Reserved

Free-Hit-Counters